Clarke CP254 Operation & Maintenance Instructions Manual - Page 7
Browse online or download pdf Operation & Maintenance Instructions Manual for Sander Clarke CP254. Clarke CP254 13 pages. Electric car polisher
Also for Clarke CP254: Operating & Maintenance Instructions (13 pages)
Print Page
ASSEMBLY
WARNING: REMOVE THE PLUG FROM THE SOCKET BEFORE CARRYING OUT
ADJUSTMENT, SERVICING OR MAINTENANCE.
ATTACHING THE BONNETS
1. Place the bonnet over the
sponge pad so the pad is
completely covered.
2. Pull the draw string tight to ensure
the bonnet will not slip.
3. Tie the string and tuck the excess
back under the edge of the
bonnet to avoid it becoming
entangled.
NOTE: Replacement applicator + polisher packs are available from your
Clarke dealer part number 6462109
ADJUSTING THE HANDLES
1. Pull the handle away from the
main body as shown.
2. Twist the handle into the position
required.
NOTE: Do not force the handle,
remember the handle does
not rotate all the way round.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7