Clarke Super 7R Operator's Manual
Browse online or download pdf Operator's Manual for Sander Clarke Super 7R. Clarke Super 7R 16 pages. Dc edger
Also for Clarke Super 7R: Operator's Manual (17 pages), Operation?And Safety (2 pages), Manual (6 pages)
Print Page
- 1. Table of Contents
- 2. Operator Safety Instructions
- 3. Machine Specifications
- 4. Sanding Cuts and Sandpaper
- 5. Machine Set-Up
- 6. Operating Instructions
- 7. Adjustment Procedures
- 8. Routine Maintenance
- 9. Maintenance
- 10. Parts and Service Manual - Section II Assembly Drawing
- 11. Assembly Parts List
- 12. Wiring Diagram 11/04
Super 7R
Operator's
DC Edger
Manual
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your Clarke
American Sanders machine could result in injury to you or to other personnel; damage to the machine
or to other property could occur as well. You must have training in the operation of this machine
before using it. If you cannot read English, have this manual explained fully before attempting to
operate this machine.
Si Ud. no pueden leer el Inglés, se hagan explicar este manual completamente antes de tratar el
manejo o servicio de esta máquina.
All directions given in this book are as seen from the operator's position at the rear of the machine.
For new books write to: Clarke
®
, 2100 Highway 265, Springdale, Arkansas 72764.
Form No. 70895A 11/04
Printed in the U.S.A.