ACOPOWER PS5B-P1 User Manual - Page 6
Browse online or download pdf User Manual for Power Supply ACOPOWER PS5B-P1. ACOPOWER PS5B-P1 14 pages. Portable power supply
Print Pagestatus and the number under INPUT shows the real-time charging power. Once It is fully charged, all
battery segments will be lit and remain solid.
Charge your Portable Power Supply when there is only a battery segment!
■ Charging from Solar
1. Power on your Portable Power Supply by press master power button for 2 seconds.
2. Place your solar panel where it will get as much direct sunlight as possible.
3. Connect the solar panel by solar charging cable, then insert the Anderson plug into one of the
INPUT ports on the left side of the Portable Power Supply. You will know the Portable Power Supply is
charging when the number below
INPUT on LCD changes and the battery segments in the LCD BATTERY DISPLAY are blinking.
The Portable Power Supply is fully charged when all battery segments stop blinking and remain solid.
4. You can also connect the Portable Power Supply to other brands of solar panels using the Anderson
Power-Pole port.
5. You can chain multiple Solar Panels together to reduce solar recharge times. Your Portable Power
Supply is
capable of taking in 120W of solar charging power. But the solar panel voltage should be from 14V
to 40V, like 18V, 36V, etc.
6. NEVER charge your Portable Power Supply with solar panels and a wall charger at the same time.
7. The Portable Power Supply will stop charging battery when it's full of energy, by the built-in advance
system control circuit module.
www.ACOPower.com
Solar Panel
4-6 Hours
5
USA Sales: 4120 Valley Blvd, Ste B, Walnut, CA 91789, USA
Tel:+1-626-575 8822/7722 Fax: 626-800 2255
Email: [email protected]
PS5B-P1
LAPTOP
3-5 Recharges