Clarke Woodworker CBS1-5 Operation & Maintenance Instructions Manual - Page 7
Browse online or download pdf Operation & Maintenance Instructions Manual for Sander Clarke Woodworker CBS1-5. Clarke Woodworker CBS1-5 15 pages. Belt/disc sander
Also for Clarke Woodworker CBS1-5: Operation & Maintenance Instructions Manual (17 pages)
Print Page
Pre-Assembly Check
Unpack the Sander and lay out the components, checking to ensure that no
damage was suffered during transit. Any damage should be reported to your
Clarke dealer immediately.
Loose items are as follows, referring to the illustration above:
A:
B:
C:
D:
E:
F:
G:
H:
J:
The use of any accessory/attachment, other than those
WARNING:
recommended in this instruction manual, may present a risk of
personal injury.
1 x Disk Sanding Table
1 x Belt Sanding Table
1 x Mitre Gauge
1 x Sand Disk Cover/Dust Extraction Port
2 x Disk Sanding Table Locking Levers
1 x Vertical Sanding Table Locking Lever
3 x Flat Washers (for use with Locking Levers)
4 x Rubber Feet
2 x Allen Keys
7