Clarke X-PRO CAT 160 Operating & Maintenance Instructions - Page 9
Browse online or download pdf Operating & Maintenance Instructions for Sander Clarke X-PRO CAT 160. Clarke X-PRO CAT 160 17 pages.
Print Page
CONNECTING THE DUST COLLECTION TUBE & BAG
1. Push the dust collection tube onto
the waste outlet.
2. Use the string to tie the dust
collecting bag onto the smaller
end of the tube.
3. The dust bag should be emptied
regularly:- do not wait until it is
completely full. Gently pull open
the velcro flap across the end of
the bag to empty the contents
into your bin.
Your sander is now ready for use. Alternatively, vacuum extract can be used.
OPERATION
IMPORTANT: Only use abrasive sanding pads designed for use with this type
of 150mm dia sanding pad (rated at over 10000rpm).
1. Squeeze the trigger against the
body of the tool to start.
• Use the speed regulator to set
the speed.
• Move the regulator lever
forwards for maximum speed
and back to slow down.
2. Rest the sander on the workpiece
before starting it. Let the sander do
the work.
• The actual weight of the sander is normally sufficient for efficient
sanding. Do not put additional pressure on the sander which would
only slow down the speed of the pad, reducing efficiency and
placing an additional burden on the motor.
3. Pass the sander back and forth in wide, overlapping areas, taking care to
keep the sander moving around at all times. Avoid dwelling in one place
for more than a moment.
4. Release the trigger to stop the sander.
5. Always ensure the sander has stopped before putting it down.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9