Directed Electronics Viper 140 HF Owner's Manual - Page 13

Browse online or download pdf Owner's Manual for Car Alarm Directed Electronics Viper 140 HF. Directed Electronics Viper 140 HF 18 pages.

Print Page

While the vehicle is running during remote start operation, the

system will monitor the vehicle and will automatically shut down

the engine if the system receives any of the following shut-down

inputs:

The brake pedal is pressed.

The hood is opened.

The shutdown toggle switch is put into the ON position.

The pre-programmed run time has elapsed.

Buttons

and

To shut down the remote start and turn off the engine:

Step on the brake pedal, or

Press

and

Timer Mode

Timer Mode automatically starts the engine and runs it for a pre-

programmed time period, every three hours for a total of six oper-

ation cycles. This feature helps to ensure that your engine will

start in the morning after a night of extremely cold temperatures.

IMPORTANT! This feature must only be used in open areas, never in an

enclosed area such as a garage.

To enter Timer Mode:

Start the vehicle by pressing and releasing

Press and release

Within two seconds press and release

are pressed again.

for one second.

and

again.

1999 Directed Electronics, Inc.