Clarke HSEC650 Operating & Maintenance Instructions - Page 11

Browse online or download pdf Operating & Maintenance Instructions for Water Pump Clarke HSEC650. Clarke HSEC650 20 pages. Submersible pumps

Print Page

CLEANING & MAINTENANCE

WARNING: MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE

MAINS SUPPLY BEFORE CLEANING, OR PERFORMING ANY

MAINTENANCE.

• This pump should require no maintenance other than regular

cleaning. If the pump starts to show signs of wear or damage,

contact your CLARKE dealer for advice.

• Do not use the pump if there is any damage to the mains power

cable, or to the float switch or it's connecting cable.

• Check pump installation regularly to ensure the base inlet is clear of

leaves or other debris.

• Do not attempt to repair the pump yourself, as you may damage

the waterproof seal and invalidate your guarantee. Repairs must be

carried out by your CLARKE dealer, or contact the CLARKE Service

Department on 020 8988 7400.

If using this pump to empty a garden pond, please note that there is a small

quantity of oil in the pump seal. If the pump or seal is damaged, possibly

caused by running the pump dry, oil may leak out, and appear as a film on

the surface of the water. The oil must be cleared to prevent any possible

harm to pond life. Disconnect the pump from the electrical supply, remove it

from the pond and clear the oil, then contact your CLARKE dealer for advice.