Clarke HSEC650A Operation & Maintenance Instructions Manual - Page 2
Browse online or download pdf Operation & Maintenance Instructions Manual for Water Pump Clarke HSEC650A. Clarke HSEC650A 17 pages. Submersible pumps
Also for Clarke HSEC650A: Operating & Maintenance Instructions (20 pages)
Print Page
INTRODUCTION
Thank you for purchasing this CLARKE Submersible Sewage Cutter Pump.
The pump is fitted with a tungsten carbide cutter, and is especially suited for
heavily polluted water containing waste solids, such as sewage, light slurry
etc.
This pump is NOT designed for pumping heavy slurry, sludge, mud, salt water,
or any water containing chemicals or other acidic contaminants. It is also not
suitable for single chamber septic tanks.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
ENVIRONMENTAL RECYCLING POLICY
Through purchase of this product, the customer is taking on the
obligation to deal with the WEEE in accordance with the WEEE
regulations in relation to the treatment, recycling & recovery and
environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general
household waste. It must be disposed of according to the laws governing
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal
facility.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2