Clarke HSEC651A Operation & Maintenance Instructions Manual - Page 6
Browse online or download pdf Operation & Maintenance Instructions Manual for Water Pump Clarke HSEC651A. Clarke HSEC651A 17 pages. Submersible pumps
Also for Clarke HSEC651A: Operating & Maintenance Instructions (20 pages)
Print Page
• You can adjust the position at
which the float switch lead is
held to the pump. Adjusting
the length of the float switch
lead will change the depth of
water at which the pump will
turn on or off.
5. When the pumping is finished,
disconnect the pump from the
mains power supply.
CAUTION: DO NOT ALLOW THE PUMP TO RUN DRY
OVERLOAD SWITCH
These pumps are fitted with a thermal overload switch. If the pump overheats
for any reason, it will automatically switch the pump OFF. Once the pump has
cooled (at least 5-10 minutes), it will automatically restart.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6