Alemite 7260 Service Manual - Page 2

Browse online or download pdf Service Manual for Tools Alemite 7260. Alemite 7260 5 pages. Cord reel with duplex outlet

Print Page

SER 7260

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING, OR SERVICING THIS EQUIPMENT

ELECTRICAL INFORMATION

CORD APPARATUS

Dual receptacle box

Frequency 60HZ single phase

Four 5/16" (7.9 mm) diameter mounting holes

Alemite, LLC

IMPORTANT

VOLTAGE

A/C

AMPS

120

Fig. 1

Personal injury and/or equipment damage may

result if proper safety precautions are not observed.

• Ensure that only a qualiﬁed electrician installs/services this

equipment.

• Ensure that power supply voltage does not exceed maxi-

mum voltage rating of reel.

• Ensure that reel is properly installed before connecting to

power supply.

• Ensure that all electrical power is removed from reel be-

fore servicing.

• A high-tension spring assembly is contained within the

reel. Exercise extreme caution.

• Check for frayed and/or broken wires before each use.

Pull electrical cord from reel by grasping the electrical

cord itself, not the work device.

• If an electrical malfunction should occur, remove

power from reel immediately.

• Ensure that reel, electrical cord, and equipment being ser-

viced are properly grounded. Use an ohmmeter to check

ground continuity.

• If reel ceases to unwind or rewind, remove power

immediately. Do not pull or jerk on electrical cord!

• Treat and respect the reel as any other piece of machinery,

observing all common safety practices.

WARNING:

Even low voltage can cause irreparable damage or

death! Exercise extreme caution while operating or

servicing this equipment.

Revision (2-05)