Directed Electronics Failsafe 103T Owner's Manual - Page 9
Browse online or download pdf Owner's Manual for Remote Starter Directed Electronics Failsafe 103T. Directed Electronics Failsafe 103T 15 pages. Failsafe starter kill
Print Page
Disarming
The system may be disarmed whether the ignition is on or off.
To disarm the system:
1.
Enter your personalized PIN code followed by
pad is now disarmed.
If the ignition is off, the unit will disarm, but the LED will
flash rapidly to indicate that the system will rearm in 15 seconds.
If the ignition is on, the system will disarm and the LED will
turn off.
If an error is made while entering the PIN code, simply press
to start over. If the PIN code is entered incorrectly
three times, the trigger sequence will begin.
If the ignition is turned on before entering the PIN code, the
unit will honk the horn once (if connected). If the correct PIN
code is not entered within 5 seconds, the trigger sequence
will begin.
Trigger Sequence (optional)
When disarming, if the correct PIN code is not entered in three
attempts or within 5 seconds after the ignition is turned on, the
unit will honk the horn (if connected) for 30 seconds. If the igni-
tion remains on, the unit will trigger again, up to four times. If the
unit has triggered four times, it will reset and trigger again if the
ignition is cycled. The unit will also trigger each time three errors
in PIN entry occur.
NOTE: When using the 103T as a stand-alone starter kill, the optional horn
honk feature must be installed in order for the trigger sequence to work.
6
. The key-
2000 Directed Electronics, Inc.
©