Directed Electronics ProStart CT-5472TW User Manual - Page 10

Browse online or download pdf User Manual for Remote Starter Directed Electronics ProStart CT-5472TW. Directed Electronics ProStart CT-5472TW 19 pages. Two-way 6-button lcd automatic/manual transmission remote starter system with full alarm system

Print Page

Directed Electronics ProStart CT-5472TW User Manual

Panic Mode

In an emergency situation, you can activate panic mode by pressing and holding the

button until the siren starts to sound.. If the vehicle is under a remote start, the engine will

shutdown automatically before setting off the Siren. You can stop the Siren by pressing:

(this will lock your doors and deactivate panic mode), or

(this will unlock your doors and deactivate panic mode).

Furthermore, the panic mode can be stopped by activating Valet Mode (page 8)

* Panic Mode will automatically shut down after 30sec.

Quick Lockout™

(Also called Secure Panic.) For fast protection in emergency situations, the system will LOCK all

doors when you press the brake pedal while you hear the Siren sounding. (Quick Lockout is only

available when Panic mode has been triggered.)

Cold Weather Mode

If the vehicle has a manual transmission, Ready mode (page 6) should be set before entering

Cold Weather mode. When Cold Weather Mode is active, the engine starts every 2 hours and runs

for 3 minutes (or for 8 or 20 minutes with diesel engines). Cold Weather Mode automatically ends

after 24 hours (or 12 starts).

To enter Cold Weather Mode:

Press the

appear on the display.

Press and hold the

To exit Cold Weather Mode, do any one of the following actions:

•

Open the hood.

•

Start the engine by remote.

•

Turn the ignition key to the IGNITION ON (RUN) position.

•

Press the

appear on the display.

Press and hold the

To verify whether the system is in cold weather mode:

•

The

•

(Automatic transmissions only) Press the brake pedal: If the vehicle is in Cold

Weather mode, the parking lights will remain ON while the brake pedal is pressed.

Extended Run Time

While the vehicle is running remotely, press and hold the

melody. This will reset the run time counter to zero and restart the run time cycle from the

beginning.

Note: The extended run time procedure can only be carried out once per remote start.

To stop the vehicle, at any moment, simply press and release the

P.10

for 1 second and release. The remote will beep once and

button until the

for 1 second and release. The remote will beep once and

button until the

icon should appear on your remote display.

icon will appear on the display.

icon will disappear on the display.

button until the remote plays the start

button.

will

User Guide