CTEK 1046 User Manual
Browse online or download pdf User Manual for Battery Charger CTEK 1046. CTEK 1046 8 pages. Professional switch mode battery charger
Print PageMANUAL
CONGRATULATIONS
to the purchase of your new professional switch mode battery charger. This charger is
included in a series of professional chargers from CTEK SWEDEN AB and represents the
latest technology in battery charging.
SAFETY
• The charger is designed for charging only bat-
teries according to the technical specification.
Do not use the charger for any other purpose.
Always follow battery manufacturers' user and
safety recommendations.
• Never try to charge non-rechargeable batteries.
• Never place the charger on top of the battery
or cover the charger when charging.
• Never charge a frozen or damaged battery.
• Never charge a Li-battery with temperature
below 0°C (32°F) if not specified by the battery
manufacturer.
• Never use a charger with damaged cables.
Ensure that the cables have not been damaged
by hot surfaces, sharp edges or in any other
way.
• Never place a fan-cooled charger so that dust,
dirt or similar can be sucked into the fan.
• A damaged cable must be replaced by a
CTEK representative using an original part
supplied by CTEK. A detachable cable can be
replaced by the user using an original part sup-
plied by CTEK.
• Connection to the mains supply must be in
accordance with the national regulations for
electrical installations.
• Chargers with grounded mains plug must only
be connected to a grounded socket outlet.
• During charging, Lead-Acid batteries could
emit explosive gases. Prevent sparks close to
the battery. Provide for good ventilation.
• Chargers with IP-class lower than IPx4 are
designed for indoor use. See technical specifi-
cation. Do not expose to rain or snow.
• Connect the charger to the battery´s positive
pole and then to the negative pole. For batter-
ies mounted inside a vehicle, connect the nega-
EN • 3