Directed Electronics Xpresskit DBALL2 Installation Manual - Page 12
Browse online or download pdf Installation Manual for Automobile Accessories Directed Electronics Xpresskit DBALL2. Directed Electronics Xpresskit DBALL2 14 pages. Databus all combo bypass module
Print Page
Quick Reference Guide
DBALL/DBALL2-GM5 Remote Start Ready (RSR) Installation
Remote Start Ready (RSR)
Remote Start Ready (RSR) is a function that enables the interface
module to remote start the vehicle completely on its own.
Consequently, there is no need for an aftermarket or an OEM remote
starter in order to start the vehicle from a distance.
Parking Light Error Codes
The parking lights on your vehicle will flash a specific number of times 3 seconds
following an unscheduled shutdown or failure to start. Each flashing pattern is
described below.
Flashes
Diagnostic
1
Runtime expired.
2
Over-rev shutdown.
3
Low/No RPM.
4
Transmitter shutdown.
5
Brake shutdown.
6
Hood shutdown/Remote start safety override switch is ON*.
7
Remote start safety override switch is ON*.
* If the vehicle hood status is supported through data, safety override switch input
will report 7 flashes.
List of Available Commands
Note that the information below is for Viper, Clifford and Python models. Icons and
commands may differ depending on the remote brand and model purchased. Refer
to your authorized installation center for more information.
Button(s)
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press
x1 +
rear hatch/tail glass release (optional).*
Press
x3 +
the panic mode.
Press
x1 +
remote starter runtime.
* This output is configurable. see your authorized installation center for more
information.
once, then
to activate the
3 times, then
to activate
once, then
to reset the
© 2015 Directed. All rights reserved.