Directed Electronics 3808A Installation Manual - Page 11
Browse online or download pdf Installation Manual for Security System Directed Electronics 3808A. Directed Electronics 3808A 18 pages. Auto-mate
Print Page
Programming System Features
The System Features Learn Routine dictates how the unit operates. It is possible to access and change any of
the feature settings using the Valet button. However, this process can be simplified by using the Bitwriter.
Note : The Bitwriter requires chip version 2.8 or newer to program this unit.
To program features:
1. Open a door, turn the ignition on and then off
2. Press/release the Valet button the number of times corresponding to the menu item number and feature
you wish to change in Feature Menu table below and then press/hold
3. The horn/siren sounds and the LED flashes the specified number to confirm the selected item.
4. The button can be released (Exit in 30 seconds if no action is performed)
5. Select the option by pressing the Arm/Disarm buttons of a programmed dealer master or consumer
remote control.
•
Pulsing +12V on the Arm input wire selects options when a remote has not been programmed
6. The horn/siren sounds and the LED flashes to indicate the selected option
7. To save the option and select the next menu item to program - return to Step 2 above.
8. To exit turn the ignition on, the horn/siren sounds twice to confirm.
NOTE: When installed as an Add-on Security System or an Add-on Sensor System; pressing the Lock/Un-
lock buttons of the OEM Remote selects options as in Step 5 above.
The learn routine Exits if any of the following occurs:
•
The open door is closed
•
The ignition is turned on
•
There is no activity for 30 seconds
•
The valet button is pressed too many times
Feature Menu
Menu
Feature
Item
1
Security Features
2
Arming Type
3
Arm/Disarm chirps
4
Ignition control locks
5
Panic
6
Hood Trigger type
7
Horn function
8
Door trigger error chirp
9
Door lock output
10
Arm defeat polarity
11
Disarm defeat polarity
12**
Sensor Add Arming Type
13
Flex Output 1
14
Flex Output 2
15
OEM Alarm Arming
**This feature does not apply to this system
© 2012 Directed. All rights reserved.
Option 1
Option 2
On*
(Off)
Active*
Passive-no lock
On
(Off)*
No ignition locks*
Lock and unlock
On*
(Off)
Normally Closed
Normally Open
Siren
(Horn 10 ms)
(On)
Off
(0.8sec)
3.5 sec
(Positive)
Negative
(Positive)
Negative
Active
(Passive)
Domelight Supervi-
(Factory Alarm
sion
Disarm)
(Domelight Super-
Factory Alarm
Disarm
vision)
Instant
Delay
Option 3
Option 4
(Passive-lock)
Lock only
Unlock only
Horn 20 ms
Horn 40 ms
0.4 sec.
double unlock (0.4
sec)
2nd unlock
Factory Alarm
Trigger
2nd unlock
Factory Alarm
Trigger
Option 5
Horn 50 ms
Remote Start
Report
Remote Start
Report
11