CTEK D250S Dual User Manual - Page 5
Browse online or download pdf User Manual for Automobile Battery Charger CTEK D250S Dual. CTEK D250S Dual 15 pages. Dc/dc ic recorder
Also for CTEK D250S Dual: User Manual (8 pages), Instruction Manual (13 pages), User Manual (12 pages)
Print Page
SmARTPASS LAmP FUNCTION
LAmP
Power lamp
Alternator battery
2
consumption lamp
Service battery charging
1
lamp
Service battery
4
consumption lamp
Alternator battery
3
charging lamp
SmARTPASS LAmP ERROR INDICATION
Steady lamp
Flashing lamp
2
1
4
3
STEADY
FLAShING
Unit ready to use
Too high current through
Engine running
relay
Charging Service
battery
Consumers powered by
Too high current through
Service battery
relay
Alternator battery
Too high current through
maintained by Service
relay
battery
ExPLANATION
Service battery overheated
Too high current through or temperature at internal relay. Too high
Service battery charge current.
Too high current through or temperature at internal relay. Too many
consumers connected at the same time.
Too high current through or temperature at internal relay. Too high
current to starter battery.
Too high current through or temperature at internal relay. Too many
consumers connected.
Battery watch activated. Service battery too low
SmARTPASS LAmP INDICATION DURING NORmAL OPERATION
2
1
+IN
12V
RECOmmENDATION
Check condition
and/or installation
Check service battery. Reduce alternator size or add one more D250S
DUAL in parallel. Service battery bank too deeply discharged.
Consider relocation of unit. Reduce power usage.
Starter battery problems, check battery.
Relocate unit or reduce concurrent use of consumers.
Recharge Service battery
4
3
ExPLANATION
High current from alternator to service battery.
Consumer powered by alternator
Reduced current from alternator to service battery.
Consumer powered by alternator
Consumer powered by alternator. Battery charged
by D250S DUAL charger
Pulse maintenance of starter battery
SMARTPASS
+OUT
+OUT
5