CTEK CGC100 User Manual - Page 6
Browse online or download pdf User Manual for Controller CTEK CGC100. CTEK CGC100 20 pages.
Also for CTEK CGC100: Installation Manual (8 pages)
Print Page
5.
Restart the NANOGRID™ controller to use a new or modified nanogrid.ini. The file is currently only processed at
system startup.
IMPORTANT: Any existing nanogrid.ini configuration file on the controller will be replaced when you install a new file
through the web interface.
6
To do a client (station) configuration
Note: Refer to the CHARGESTORM CONNECTED 2 USER MANUAL for instructions on how to access the web interface
on a CHARGESTORM CONNECTED 2 station.
In the web interface, go to "Configuration" in the left menu.
1.
4
1
2.
Select the "Grid" tab.
3.
Make sure that "NANOGRID Load Balancing" is set to "Full".
4.
If the value is not set to "Full," change the value in the drop-down and press the "Save" button.
5.
When prompted, push the "Reset" button on top of the web interface page to reset the applications on the station
and apply new settings.
Configuration instructions
2
4
3
CTEK E-Mobility AB