Clarke CMSF110 Operating & Maintenance Instructions - Page 12

Browse online or download pdf Operating & Maintenance Instructions for Saw Clarke CMSF110. Clarke CMSF110 20 pages. Multi purpose circular saw

Print Page

CHANGING THE BLADE

REMOVING THE BLADE

1. Ensure the power cable is

disconnected from the power

supply.

2. Press the spindle lock to prevent

movement of the saw blade.

3. Loosen the hex bolt using the hex

key.

4. Remove the hex bolt and outer

retaining washer.

5. Hinge away the lower guard and

remove the blade.

INSTALLING THE BLADE

1. Ensure the power cable is disconnected from the power supply.

2. Press the spindle lock to prevent

movement of the saw blade.

3. Install the blade in the orientation

shown in fig 4 when viewed from

the right hand side of the saw. Do

not use a blade with no markings

but if they have become worn

away during previous use, inspect

the blade and note the position

of the cutting teeth. The teeth

must face in the direction of

rotation as shown by the arrow

on the blade in fig 4 when viewed from the right-hand side of the saw.

4. Install the retaining washer and hex bolt.

5. Tighten the hex bolt using the hex key. Return the hex key to its storage

socket in the saw body.

CAUTION; INSTALLING THE BLADE THE WRONG WAY ROUND MAY

RESULT IN DAMAGE TO THE BLADE.

Note: Replacement blades are available from your CLARKE dealer; part

no 6462168.

Fig 3

Fig 4