Clarke CON14 Operation & Maintenance Instructions Manual - Page 3

Browse online or download pdf Operation & Maintenance Instructions Manual for Saw Clarke CON14. Clarke CON14 17 pages. Abrasive cut-off saw

Print Page

GENERAL POWER TOOL SAFETY WARNINGS

WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL

INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/

OR SERIOUS INJURY. THE TERM "POWER TOOL" IN THE WARNINGS REFERS

TO YOUR SAW.

a. Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

b. Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

a. Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will reduce risk of electric

shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

d. Do not abuse the cable. Never use the cable for carrying, pulling or

unplugging the power tool. Keep cable away from heat, oil, sharp

edges or moving parts. Damaged or entangled cables increase the risk

of electric shock.

e. When operating a power tool outdoors, use an extension cable suitable

for outdoor use. Use of a cable suitable for outdoor use reduces the risk

of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a

residual current device (RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]