Clarke ZX-R Pro Series Operation & Maintenance Instructions Manual - Page 9

Browse online or download pdf Operation & Maintenance Instructions Manual for Saw Clarke ZX-R Pro Series. Clarke ZX-R Pro Series 17 pages. 20v cordless multi function tool
Also for Clarke ZX-R Pro Series: Operation, Maintenance & Instruction Manual (8 pages), Operation & Maintenance Instructions Manual (9 pages), Operation & Maintenance Instructions Manual (13 pages), Operation & Maintenance Instructions Manual (17 pages), Operation & Maintenance Instructions Manual (17 pages)

Print Page

FITTING THE BATTERY PACK (NOT SUPPLIED)

This lamp requires a Clarke 20V Lithium-ion battery pack (6487040) and 1 Hour

Charger (6487050) to operate. Both are available separately from your local

Clarke dealer.

TO FIT THE BATTERY

1. Slide the battery on to the circular

saw.

TO REMOVE THE BATTERY

1. Push and hold the release buttons

on the side of the battery.

2. Slide the battery away from the

base of the handle.

ADJUSTMENTS

WARNING: DISCONNECT THE BATTERY FROM THE CIRCULAR SAW BEFORE

FITTING REPLACEMENT BLADES, CLEANING OR ADJUSTMENT.

1. Loosen the depth adjustment

knob.

2. Adjust the base plate until the

required depth of blade is

protruding through the base

plate.

3. Tighten the depth adjustment

knob.

NOTE: A full tooth should just be

visible below the workpiece.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]