Clarke 6920252 Operating & Maintenance Instructions - Page 12
Browse online or download pdf Operating & Maintenance Instructions for Heater Clarke 6920252. Clarke 6920252 17 pages.
Print Page
FAULT FINDING
SYMPTOM
Heater does not
operate, although
plugged in and
switched on.
Heater does not
respond to remote
controller
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PROBLEM
Plug is loose/bad
connection.
Fuse blown.
No power at socket
outlet.
Tilt safety switch is
disabling the heater.
Batteries defective.
Controller is out of
range or not pointing
at the display panel.
Unit damaged
12
SOLUTION
Remove the plug & check
the connection of the plug
and socket.
Replace if necessary and
investigate the cause. If the
fuse blows repeatedly,
consult your CLARKE
dealer.
Insert the plug into a
suitable socket.
Ensure heater is upright. If
the switch does not re-set,
consult your CLARKE
dealer.
Replace batteries.
Move closer or try different
angles of pointing the
controller at the heater.
Consult your CLARKE
dealer.