Clarke 6920280 Operating & Maintenance Instructions - Page 4

Browse online or download pdf Operating & Maintenance Instructions for Heater Clarke 6920280. Clarke 6920280 20 pages. Paraffin/diesel heaters

Print Page

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an

approved 13 amp BS 1363 plug, or a suitably fused isolator switch.

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code:

As the colours of the flexible cord of this appliance may not correspond with the

coloured markings identifying terminals in your plug proceed as follows:

Connect GREEN & YELLOW cord to terminal marked with a letter "E" or Earth

symbol "

" or coloured GREEN or GREEN & YELLOW.

Connect BROWN cord to terminal marked with a letter "L" or coloured RED

Connect BLUE cord to terminal marked with a letter "N" or coloured BLACK

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.

non-rewirable) please note:

The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

Never use the plug without the fuse cover fitted.

Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

Replacement fuse covers can be obtained from your local dealer or most

electrical stockists.

We recommend that this machine is connected to the mains supply through a

Residual Current Device (RCD).

Fuse Rating

The fuse in the plug must be replaced with one of the same rating (13 amps) and

this replacement must be ASTA approved to BS1362.

If in doubt, consult a qualified electrician. Do not attempt any electrical repairs

WARNING! THIS APPLIANCE MUST BE EARTHED

Green & Yellow

Blue

Brown

Earth

Neutral

Live

yourself.