Clarke 6925601 Operation & Maintenance Instructions Manual - Page 6

Browse online or download pdf Operation & Maintenance Instructions Manual for Heater Clarke 6925601. Clarke 6925601 13 pages. 2.8kw 230v ptc electric fan heater

Print Page

ELECTRICAL CONNECTIONS

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY

BEFORE CONNECTING THE HEATER TO THE MAINS SUPPLY.

Before switching the product on, make sure that the voltage of your electricity

supply is the same as that indicated on the rating plate. Connecting it to any

other power source may cause damage.

If it is necessary to change the fuse in the plug, the fuse cover must be refitted.

If the fuse cover becomes lost or damaged, the plug must not be used until a

suitable replacement is obtained.

If the plug has to be changed due to damage, a replacement should be

fitted, following the wiring instructions shown below. The old plug must be

disposed of as insertion into a mains socket could cause an electrical hazard.

If the colors of the wires in the power cable of this product do not correspond

with the markings on the terminals of your plug, proceed as follows.

• The Blue wire must be

connected to the

terminal which is

marked N or coloured

Black.

• The Brown wire must

be connected to the

terminal which is

marked L or coloured

Red.

• The Yellow/Green wire

must be connected to

the terminal which is marked E or coloured Green.

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs

yourself.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]