Clarke 6926001 Operating & Maintenance Instructions - Page 6

Browse online or download pdf Operating & Maintenance Instructions for Heater Clarke 6926001. Clarke 6926001 13 pages. Halogen heaters

Clarke 6926001 Operating & Maintenance Instructions

UNPACKING AND ASSEMBLY

Before assembling, please check contents against the following list and advise
your dealer immediately if any parts are missing.
1 x Heater
2 x Support Bars with casters (P only)
2 x Locking Knobs (SP only)
1 x Handle

TOOLS REQUIRED

10mm & 14 mm spanner (370PB/371PB),
10 mm spanner (370SPB/371SPB).
DEVIL 370PB /371PB
1. Attach the support bars to the heater
body using 14mm securing bolts supplied.
2. Attach the handle to the heater body
using four bolts and plastic blocks
supplied.
3. Unscrew the front guard and fit the
halogen tubes (see page 7).
DEVIL 370SPB/371SPB
1. Bolt the three parts of the frame together
at positions 1 & 2.
2. Attach the frame to the heater body as
shown, using the locking knobs and the
plastic packing pieces at positions 3 & 4.
NOTE: The larger packing piece should fit
nearer the heater.
3. Unscrew the front guard and fit the
halogen tubes (see page 7).
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2 x Quartz Halogen Tubes
1
x Frame with casters (SP only)
2 x Packing Pieces (SP only)
1 x Fixings pack
6