LEGO 42031 Quick Start Manual - Page 7
Browse online or download pdf Quick Start Manual for Toy LEGO 42031. LEGO 42031 8 pages. Tow truck
Print Page
Insert a ridged stick upright into the cross-hole at the right until it touches the table.
Put a ribbed tube with the hole upright on top, the round hole to the top front-to-back.
Repeat steps 1-3 to make two such parts.
Install one such part, as is, putting the hole on the top onto the connector in the leftmost hole of the PP,
swinging the right bottom end to the right and putting the round hole at the bottom at the left onto the
connector in the middle of your structure.
Repeat symm at the back.
Lay momentarily aside.
Bag 23. Make a part.
Put a F 3x1 piece hor on the table.
Insert a ridged stick upright into the leftmost hole until it touches the table.
Repeat symm at the right.
Put a F sector piece on top, ver, so that the curve is to the left and to the back and the sticks are in the
front-row holes.
Turn this piece upright, so that the sticks protrude to the front at the bottom, and connect it to your
structure from the back by inserting the sticks into the first and 3rd holes from the left of the 13x1 piece.
On the second story (the higher row of buttons))
Lay aside.
Bag 24. Make a part.
Put two F nuts onto a ridges sticks so that they touch and are in the middle of the stick.
Put a 2x1 oblong piece onto the left end of the stick, ver, the cross-hole on the stick and the round hole to
the front and to the top and bottom.
Repeat symm at the right.
Insert a half-connector from the top into each round hole.
Insert a rounded peg into each half-connector.
Turn this part ver, the pegs to the left, and install over the curved pieces, the back end of the part into the
top cross-hole of the sector piece at the back.
Bag 25.
Put a F sector piece upright at the front, symm to the similar piece at the back.
Put a F 3x1 oblong piece hor, upright, at the bottom onto the two connectors at the bottom of the sector
piece, symm to the similar piece at the back.
Bag 26.