Clarke DEVIL 2000PTC Operation & Maintenance Instructions Manual - Page 10
Browse online or download pdf Operation & Maintenance Instructions Manual for Heater Clarke DEVIL 2000PTC. Clarke DEVIL 2000PTC 13 pages. 2kw electric fan heater
Also for Clarke DEVIL 2000PTC: Operation & Maintenance Instructions Manual (13 pages)
Print Page
FAULTFINDING
Problem
Heater does
not
operate,
although
plugged in
with the
switch and
thermostat
switched on.
Heating
element
glowing hot.
Heater has
failed to heat
up so only the
air fan has
operated.
Abnormal
noise.
DECLARATION OF CONFORMITY
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Possible Cause
Plug is loose/bad
connection.
Fuse blown or
circuit breaker
trips.
No power at
socket outlet
Input voltage too
high.
Air inlet grille is
blocked
Thermostat has
tripped.
Heater is not level. Stand heater on a level surface
Remedy
Pull the plug out & check the connection of
the plug and socket.
Replace if necessary and investigate
cause. If fuse blows repeatedly, consult
your Clarke dealer.
Insert the plug in a functioning socket.
Use a power supply in accordance with the
rating on the label.
Ensure the heater is kept away from any
objects which could cover the air inlet or
be drawn into it.
Turn the thermostat and listen. If there is no
CLICK and the thermostat is not damaged,
the heater will automatically switch ON
when it has cooled down.
10