Clarke DEVIL 350B 230V Operating & Maintenance Instructions - Page 12

Browse online or download pdf Operating & Maintenance Instructions for Heater Clarke DEVIL 350B 230V. Clarke DEVIL 350B 230V 17 pages.

Print Page

CLEANING & MAINTENANCE

Always allow the heater to cool down for at least 15 minutes and disconnect it

from the mains supply before performing any maintenance tasks.

PERIODICALLY

1. Inspect the power cable for damage. Undue heat will cause the cable to

stiffen and crack. If this is found, have the cable replaced. Check your

cable routing and ensure it is well away from the heat source.

2. Should the heater become dirty, disconnect it from the power supply,

remove the front guard and wipe the reflector and elements with a clean

damp cloth. DO NOT use abrasive cleaners. Take care that no moisture

enters the heater.

3. Refer to your CLARKE dealer if internal maintenance is required.

4. When storing the heater, allow it to cool down before storing it in a dry, well

ventilated place.

Ceramic heating elements are long lasting and should not need replacing

under normal circumstances. Should this become necessary take the heater

to your Clarke dealer.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]