Afterglow AW.1 User Manual - Page 2
Browse online or download pdf User Manual for Video Gaming Accessories Afterglow AW.1. Afterglow AW.1 8 pages. For nintendo wii
Print Page4) Press the AFTERGLOW™ button once to cycle to ACCELERATOR setting. The AFTERGLOW™
Remote will vibrate twice to signal the change. In ACCELERATOR mode, AFTERGLOW™
lighting will activate when the AFTERGLOW™ Remote experiences strong acceleration.
5) Press the AFTERGLOW™ button once more. Three vibrations will signal the AFTERGLOW™
Remote is now on the OFF setting. Only the AFTERGLOW™ Remote's appropriate player
indicator light will glow.
6) To return to ON mode, press the AFTERGLOW™ button once more. One vibration will signal
the remote is now in ON mode.
7) Cycle through the three settings as often as you like and enjoy the AFTERGLOW™ in your
favorite mode!
CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority
to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC ID: X5B-PL7602A
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15
of the FCC RF Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
IC: 8814A-PL7602A
This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée
aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
*please keep this information for future reference
1840 East 27th Street
Vernon, CA 90058 USA
For technical questions please visit
www.pdp.com or call: 1-800-331-3844 (USA & CANADA ONLY)
© 2012 Performance Designed Products LLC. All rights reserved. PDP and AFTERGLOW are trademarks of Performance Designed
Products LLC. Wii is a registered trademark of Nintendo of America, Inc. This product is not designed, manufactured, sponsored or
endorsed by Nintendo.
CUIDADO - Siempre use la muñequera – Jugar Wii con el control remoto AFTERGLOW™ puede
involucrar movimientos rápidos o vigorosos. Favor use la muñequera incluida para no soltar
el control remoto AFTERGLOW™ y causar daños al control remoto o a los objetos que están
alrededor o lesiones a personas.
Gracias por comprar el control remoto AFTERGLOW™ para Wii®
Contenido:
1 control remoto AFTERGLOW™ para Wii®
1 muñequera para el control remoto AFTERGLOW™
1 manual
Uso del control remoto AFTERGLOW™:
1) El control remoto AFTERGLOW™ está diseñado para funcionar con el sistema de video
juegos Nintendo Wii®. El control remoto AFTERGLOW™ debe ser sincronizado con la
consola Nintendo Wii para poder funcionar.
POWER
HOME
A
1
2
1
2
3
4
CBX II - 382-390 Midsummer Blvd.,
Milton Keynes, Buckinghamshire MK9 2RG UK
POWER
HOME
A
1
2
1
2
3
4
2) Primero, remueva la puerta de las pilas del control remoto AFTERGLOW™ e inserte dos
(2) pilas AA dentro del compartimiento de acuerdo a las instrucciones de orientación
marcadas en el compartimiento de las pilas.
3) Luego, abra la puerta pequeña al frente de su sistema Wii. Mientras el Wii está ENCENDIDO,
presione el botón rojo de sincronización que se encuentra adentro.
4) Ahora, presione el botón rojo de sincronización en el compartimiento de las pilas del
control remoto AFTERGLOW™. Los indicadores LED de cuatro jugadores en el control
remoto AFTERGLOW™ parpadearán mientras la comunicación toma lugar.
5) La sincronización entre el control remoto AFTERGLOW™ y la consola Wii se confirmará
cuando las luces indicadoras de jugadores dejen de parpadear y se reemplacen con sólo
una luz indicadora de jugador iluminada
6) Coloque nuevamente la puerta de las pilas en el control remoto AFTERGLOW™.
7) Antes de jugar, enganche la muñequera al control remoto AFTERGLOW™. Siempre use la
muñequera para el control remoto AFTERGLOW™ y asegúrese de que esté apretada firme
mente alrededor de su muñeca.
Cambio de modo de AFTERGLOW™:
1) El control remoto AFTERGLOW™ cuenta con tres (3) modos de efectos de iluminación: "ON"
(Activado), "ACCELERATOR" (Acelerador) y "OF" (Desactivado).
1
2
1
2
3
4
CUIDADO - Deje suficientemente espacio
en su alrededor mientras juegue. Quédese
por lo menos a 3 pies del televisor. Mientras se
desplace durante el juego, asegúrese de que
los objetos y las personas sean alejados de sus
movimientos o del movimiento de su brazo
para evitar daños o lesiones.