Clarke DEVIL 4003 Operation & Maintenance Instructions Manual - Page 4
Browse online or download pdf Operation & Maintenance Instructions Manual for Heater Clarke DEVIL 4003. Clarke DEVIL 4003 13 pages. 2.8kw workshop ptc heater
Print Page
SAFETY RULES
Make sure that you read, understand and comply with the following.
WARNING: THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED AREAS
AND IS NOT DESIGNED TO BE THE PRIMARY HEAT SOURCE.
SAFE WORKING PRACTICES
• DO NOT operate the heater when you are tired or under the influence of
alcohol, drugs or intoxicating medication.
• DO NOT stand on the heater.
• DO NOT use the heater with wet hands or when there is water on the
power cable.
• Turn the heater off when not in use and keep it in a safe, dry location.
The heater is designed to heat enclosed areas larger than 4m
workshops and other industrial areas. Do not use the heater for any other
function. It is not suitable for drying clothes or laundry.
ELECTRICAL SAFETY
WARNING: THIS HEATER MUST BE EARTHED.
• Regularly inspect the power cable / plug for signs of damage/looseness.
DO NOT use the heater it the power cable is damaged.
• Minimise the risk of electric shock by installing a RCCB (Residual Current
Circuit Breaker) and a suitable isolator into the main distribution board.
• Make sure that the voltage on the rating label is the same as the voltage
of the power supply. If in doubt, consult a qualified electrician.
• DO NOT abuse the electrical cable. Never use the cable for pulling or
unplugging the heater.
• Keep the cable away from sources of heat, oil, sharp edges or moving
parts. Damaged or tangled cables increase the risk of electric shock.
• DO NOT use extension cables with this heater.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
4
3
, such as