Clarke DEVIL 9000PTC Operation & Maintenance Instructions Manual - Page 8
Browse online or download pdf Operation & Maintenance Instructions Manual for Heater Clarke DEVIL 9000PTC. Clarke DEVIL 9000PTC 17 pages. 400v electric fan heater
Also for Clarke DEVIL 9000PTC: Operation & Maintenance Instructions Manual (13 pages)
Print Page
OPERATION
WARNING: DO NOT USE THIS HEATER IN SMALL ROOMS WHEN THEY ARE
OCCUPIED BY PERSONS NOT CAPABLE OF LEAVING THE ROOM ON THEIR
OWN, UNLESS CONSTANT SUPERVISION IS PROVIDED.
CAUTION: SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND
CAN CAUSE BURNS. PARTICULAR ATTENTION HAS TO BE GIVEN WHERE
CHILDREN AND VULNERABLE PEOPLE ARE PRESENT.
1. Put the heater in a level position
on a flat surface and at a safe
distance from flammable
materials. Keep a minimum of 2m
clearance all round.
2. Connect the heater to a suitable
power supply.
3. Set the thermostat control to the
maximum setting (fully clockwise).
4. Set the mode selector to one of
the 3 settings:
• The heater will take up to three minutes to reach optimum temperature.
5. Once the room reaches the required temperature, turn the thermostat
control slowly counter-clockwise until the thermostat clicks, leave the
control in this position.
• The room temperature will be maintained at this setting. The heater will
continue to operate until the power switch is turned to the OFF position.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Off
Fan Only
Heat Setting 1
Heat Setting 2
8