Clarke CONTRACTOR 6462118 Operation & Maintenance Instructions Manual - Page 16
Browse online or download pdf Operation & Maintenance Instructions Manual for Tools Clarke CONTRACTOR 6462118. Clarke CONTRACTOR 6462118 20 pages. Worktop jig
Print Page
Post Form Edge
Cut Direction
Male Joint (Fig. 21)
7.
8. Fully insert two pins in the jig holes marked 'M' with angle symbol
9. Refer to page 10, (cutting to length) to determine where to mark the pencil line for
positioning the jig on the worktop.
10. Ensure the 2 pins in holes marked 'M' are pushed firmly against the post form edge
and the jig on the pencil line (Fig. 17).
11. Firmly clamp the jig to the worktop ensuring it doesn't move as you do so. Ensure the
clamps do not obstruct the router path.
Cutting
12.
- Follow steps 6 - 9 on page 6.
-15-
Female joint - laminate face down.
- Place the worktop with the laminate face up.
Pencil Line
Male Joint - Laminate face up.
Fig. 20
.
Post Form Edge
Cut Direction
Fig. 21