3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Gateway 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys. 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys 15 pages. Wireless intrusion prevention system
Also for 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys: Datasheet (4 pages)

Print Page

Power Over Ethernet from a PoE Injector

To power the Sentry using a PoE Injector (not included), do the following:

Connect the LAN cable from the switch or hub to the Hub/Switch port on the PoE Injector

(not included).

Next connect a LAN cable from the Ethernet port on the Sentry to the other port on the PoE

injector.

Plug the PoE Injector into a properly grounded electric outlet.

6. Checking the LED Indicators

When the Sentry is connected to power, LEDs indicate activity as follows:

To Sentry

Sentry

LED

Power Green

11a

11b/g

LAN

Color

Indicates

Power On

Amber

Flashing indicates a hardware failure,

or the system is booting.

Off

Power Off

Green

Flashing indicates the link is OK and

the Sentry is defending against rogue

connections on the 802.11a 5.0 GHz

wireless network.

Off

The radio is off

Green

Flashing indicates the link is OK and

the Sentry is defending against rogue

connections on the 802.11b/g

2.4 GHz wireless network.

Off

The radio is off

Green

Indicates a 10/100Base-T network is

detected at the Ethernet port. If the

LED is flashing, the link is OK and

data is being transmitted or received.

Off

No link

To Switch/Hub

Switch/Hub

(non-PoE)

WX12 00

Switc h

h WX12

ess LAN

LAN Switc

95A Wirel

Wirel ess

X1206

95A

3CRW