Clarson PUBLIC III Operating And Installation Instructions - Page 3
Browse online or download pdf Operating And Installation Instructions for Headsets Clarson PUBLIC III. Clarson PUBLIC III 4 pages. With cs60 dect
wireless headset system
Also for Clarson PUBLIC III: Operating And Installation Instructions (2 pages)
Print PageLogin of One / Several Headset(s) at the CS60 Base Station
If one or several headset(s) are run at one CS60 base station, they are logged
in as follows:
1.
Insert the headset into the charging station
2.
Press and hold speech volume buttons +
for at least 5 sec —> power voltage indicator flashes
3.
Press and hold headset mute button
—> online indicator
23
is illuminated.
4.
Login is finished if the power voltage indicator
online indicator
23
goes out.
5.
If login is not made within 2 minutes, the headset returns to original state.
Configuration dial in position „1"
4
12
3
and -
4
of the base unit
16
.
22
for at least 5 sec.
16
is illuminated and
Speech button
21 =
Adjusting the
listen volume
Operating Instructions
1.
Connect jack
of the CS60 base station to the interface
of the PUBLIC III microphone loudspeaker unit (page 3)
or directly to the PUBLIC III central unit HEADSET (page 2).
2.
Connect CS60 base station to the mains (page 2).
3.
Switch on PUBLIC III microphone loudspeaker unit ( ).
Press speech button (20, page 4) of the CS60 headset —>
led above button
of the microphone loudspeaker unit flashes,
headset operation is activated.
4.
Back to standard mode:
- Press speech button (20, page 4) of the CS60 headset.
- Switch the PUBLIC III system off and again on ( ).
5.
For all other functions please refer to the PUBLIC III Operating and
Installation Instructions as well as to the CS60 Quickstart Guide.
CS60 DECT
Wireless Headset System
offering three wearing styles:
♦
Ear-loop
♦
Over-the-head
♦
Behind-the-neck *
* optional
Over-the-head
Ear-loop
Behind-the-neck
5