3Com NBX 100 Software Upgrade Instructions

Browse online or download pdf Software Upgrade Instructions for Gateway 3Com NBX 100. 3Com NBX 100 4 pages. Business telephone
Also for 3Com NBX 100: Release Note (8 pages), Release Note (11 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages), Quick Reference Manual (2 pages)

Print Page

NBX System Software Upgrade Instructions

Before you begin to upgrade your 3Com

Release Notes (the readme.pdf file on the NBX Resource Pack CD). For details on each screen in the

NBX NetSet™ utility, click the Help button on the screen.

CAUTION: To upgrade an NBX system to R5.0 software, you must first upgrade to NBX

Release R4.3 or higher. If you upgrade from R4.2.6 or an earlier release, and then later

reboot to that earlier release, some 3Com telephones become disabled and the error

message "checksum error" appears in the telephone display panel.

If you do not choose to retain your database during the upgrade reboot operation, the configuration

reverts to the default database.

Be aware that Call Data Reporting 5.0 does not work with CDR records at R4.3 or below. See the

information about CDR 5.0 later in this document.

FIRST: BACK UP YOUR DATABASE AND LICENSES

1. Make a note of the version of software that you are currently running. You might need to know this

in a later step of the upgrade process. You can see the version number on the NBX NetSet utility

opening screen or on an NBX Telephone display panel by picking up the handset, pressing the

Feature button, and then dialing 837.

2. Start the NBX NetSet utility: Open Microsoft Internet Explorer, enter your NBX system's IP

address, and then press Enter.

3. Log on to the NBX NetSet utility as administrator. (Be sure to use a lower case "a" when typing

administrator as the username because the NBX operating system is case-sensitive.)

4. Select Operations > Manage Data and click the button labeled Backup Database.

The backup process creates a .tar file that you save in a location of your choosing. For more

information about this process, see the online help for Manage Data.

5. Select Operations > Manage Data and click the button labeled Backup Licenses.

The backup process creates a .tar file that you save in a location of your choosing. For more

information about this process, see the online help for Manage Data..

SECOND: REMOVE OBSOLETE SYSTEM SOFTWARE (NBX 100)

To be sure that there is enough room on the hard disk, 3Com recommends that you retain the current

version and only one or two previous versions of software on an NBX 100 system. To remove an old

version of software:

1. Log on to the NBX NetSet utility as administrator.

2. Select Operations > Software Upgrade.

3. From the "Select version to remove" list, click the software version that you want to remove.

4. Click Remove.

5. Repeat until you have deleted all of the older versions that you want to remove.

Important Upgrade License Notes

•

To run NBX system software release R5.0, you must install a license key.

NBX

software, read ALL of these instructions and all of the