Acorn OMEGA Installation, Operation And Maintenance Instructions - Page 5

Browse online or download pdf Installation, Operation And Maintenance Instructions for Control Unit Acorn OMEGA. Acorn OMEGA 6 pages. Thermostatic mixing valve

Print Page
INSTALLATION: ST7017-PEX
1. Locate Mixing Valve 1 in a suitable place
accessible for servicing and adjusting. Valve
should be as close as possible to point of use.
2. Thoroughly flush supplies.
3. Slide Brass Nut 2 and installer provided
Gripper/Clamp 3 onto the end of Tubing 4
4. Insert PEX Adapter 5 into Tubing 4 and tighten
Crimp Rings 3.
5. Insert Gasket 6 between Valve body 1 and
Adapter 3 then tighten Hex Nut 2.
6. Slowly turn on supplies, check for leaks and
tighten Hex Nut 2 if needed.
8
Detail - A
Acorn Controls
Division of Acorn Engineering Company
Manual #7802-127-001
1
7
ST7017 Installation & Operation Manual
TEMPERATURE ADJUSTMENT:
1. Using 5/8" 7 Wrench loosen Locknut 8.
Detail A
2. Turn on fixture(s) so temperature can stabilize.
3. Using an 1/8" Allen Wrench 9, turn Adjustment
Stem 10 counter-clockwise for hotter or
clockwise for colder outlet temperature.
Detail B
4. Tighten Locknut 8 to prevent any unauthorized
or accidental temperature adjustment.
5. Turn on fixture(s) and re-check temperature.
6
10
, A member of Morris Group International
®
5
2
4
Detail - B
™
Page 5 of 6
Date: 07/20/2020
3
9