Acorn SV16 Installation, Operation And Maintenance Manual - Page 3
Browse online or download pdf Installation, Operation And Maintenance Manual for Control Unit Acorn SV16. Acorn SV16 11 pages. Temperature/pressure balancing mixing valve
Print Page
ROUGH-IN DIMENSIONS:
24"
(610)
REF.
3
1
" (44)
4
MIN.
1
2
" (64)
2
MAX.
1/2" NPT PLUG
FIGURE 1
SPECIFICATIONS:
Connections: ................... Combination 1/2" NPT and
Riser Connection: ...................................... 1/2" NPT
Flow Rate: ........... 4 gpm (15 lpm) @ 45 psi (310 kpa)
Hot Water Supply Temp.: ........ 110°-180°F (43°-82°C)
Cold Water Supply Temp.: ......... 35°-80°F (1.7°-27°C)
Approach Temperature*: .........................
Maximum Operating Pressure: ........ 125 psi (862 kpa)
Temperature Ranges*: .................
Minimum Flow: ............................................
*Please refer to ASSE 1016-2011 for other test conditions
which may or may not equal installed conditions.
NOTE;
ALL DIMENSIONS ARE IN INCHES (MM).
Acorn Controls
Division of Acorn Engineering Company
Manual #7802-116-000
72"
(1829)
A.F.F.
ROUGH-IN
GUIDE
COMBINATION
1/2" NPT AND
1/2" SWEAT
CONNECTIONS
Ø4 1 2 "
(114)
ROUGH-IN
Patent Pending
1/2" sweat Inlet-Connections
Differential
5°F (2.8°C)
Above Set Point
85°-115°F (29-46°C)
1.25 gpm (4.7 lpm)
SV16 Installation & Operation Manual
72"
(1829)
A.F.F.
5 1 8 "
1/2" NPT
(130)
FEMALE
CONNECTION
3 3 8 "
(86)
1/2" NPT
FEMALE
CONNECTION
OPTIONAL
TUB SPOUT
!
IMPORTANT
Excessive overheating of valve during soldering
may damage the cartridge and checkstops. Do
not heat valve any higher than needed to flow
solder. If a higher temperature method is being
used all internal components must be
removed. See figures 8 for cartridge removal
and 9 and10 for temperature limit setting.
, A member of Morris Group International
®
3
1
" (44)
4
MIN.
1
2
" (64)
2
MAX.
ROUGH-IN
GUIDE
1/2" NPT
CONNECTION
20"
(508)
A.F.F.
FIGURE 2
™
Date: 09/01/16
24"
(610)
REF.
Page 3 of 9