DirekTronik DVFX-110-TR User Manual - Page 2

Browse online or download pdf User Manual for Extender DirekTronik DVFX-110-TR. DirekTronik DVFX-110-TR 6 pages. 1-fiber detachable dvi module

Print Page
Welcome!
Congratulations on your purchase of the Stretch DVI
Optical DVI (Digital Visual Interface) Extension Module. This manual contains
information that will assist you in installing and operating the product.
Product Description
The DVFX-110-TR optical DVI module transmits four (4) optical data, Red,
Green, Blue and clock and can be extended up to 1,000 meters (4920ft) over
one (1) SC single or multi-mode fiber at WUXGA (1920x1200), 60Hz vertical
refresh rate. The EDID (Extended Display Identification Data) in a display can
be read and restored by just plugging once transmitter to the display. This
Self-EDID programming feature makes the installation of DVFX-110-TR more
easy and flexile at any variable resolution display systems. The key features of
DVFX-110-TR is, by using an optical splitter (OPS-116S), one (1) signal from
transmitter can be copied up to sixteen (16) times and it gives you a cost
effective and space saving installation for various application. For your
convenience, UXGA EDID would have been done before shipment as a
default.
Shipping Group
DVFX-110-TR Optical DVI Extension Module: One (1) pair
AC/DC power adapter: Two (2) units of +5V, 2A
User's Manual
Option Product: Simplex SC Patch Cord (Single or Multi-mode fiber)
DVFX-110
TX
DVI Source
Figure 1 – Connection Diagram of Optical DVI Extension Module
1-1 Welcome, Product Description
TM
DVFX-110-TR
Up to 1.5Km at WUXGA
DVFX-110
RX
DVI Display

System Requirements for Setup

Hardware requirements
You have to have a DVI graphic controller or card having a DVI
port in your PC, SUN or Mac systems. It should support the
maximum graphic resolution feature of displays to be connected.
No special requirements for memory size, CPU speed and
chipsets, if you've already properly installed your DVI graphic
controllers or cards.
Software requirements
No special restrictions, if you've already properly installed your
DVI graphic controller in your OS.
AC/DC Power Adapter Technical Advisory
The transmitter (Tx) module of DVFX-110-TR is designed for power
protection circuit from conflict of power supply between the external
AC/DC power adapter and your DVI source by #14 pin.
We strongly recommend to use external AC/DC adapter for
Transmitter (Tx) for stable power supplying. In case of Receiver (Rx),
power should be supplied by AC/DC adapter due to no internal power
supplying from the displays.
1-2 System Requirements for Setup