Clarus Technologies PCS-15 Operator's Manual - Page 7
Browse online or download pdf Operator's Manual for Cleaning Equipment Clarus Technologies PCS-15. Clarus Technologies PCS-15 16 pages. Cleaning stations
Also for Clarus Technologies PCS-15: Operator's Manual (14 pages)
Print Page
Warning
Means that if the safety information is not followed, personnel,
equipment or the environment may be damaged or hurt.
Material Safety Data Sheets (MSDS)
The MSDS provides technical information regarding use, hazards, precautions and
emergency procedures related to specific fluids. The MSDS also contain toll-free phone
numbers that may be called to provide further safety and emergency treatment
information.
Operators of the Clarus Cleaner must have on hand an MSDS for each type of
solvent that they will be using. The MSDS are available from the solvent supplier. In
some localities it is required by law that appropriate MSDS are on hand whenever
hazardous or flammable material is being processed.
B.
Safety Equipment.
1. Safety Glasses. Operators should wear safety glasses during the operation of the
Cleaner. The major hazard is the possibility of splashing petroleum-based fluids
into the eye. If petroleum-based fluid is splashed into the eye, severe damage
may occur. First Aid treatment should be initiated immediately. Refer to MSDS.
2. Protective Gloves. Appropriate protective gloves should be worn whenever there
is a possibility that the fluids being used may come into contact with the hands.
Different types of gloves may be required for differently types of fluids. The
local safety supply source can recommend the appropriate protective gloves.
Flammable. For the safety of owners and operators NO SMOKING around or near this
equipment.
V.
QUICK START GUIDE
Please read entire Quick Start Guide before beginning, this will avoid possible start up
problems.
A.
Uncrate Unit
1. Remove outer wrap.
2. Unbolt legs from pallet.
3. Remove Light Bar Assembly from packaging.
4. Remove all loose packing.
B.
Install Light/Lid Bar Assembly
The PCS/WCS models are equipped with a light bar assembly. A standard RPW/RWC
model contains a lid bar. The light bar assembly is optional on the RPW/RWC models.
Both of the bars are required to hold the lid up when using the equipment.
To install the light/lid bar assembly, unscrew the provided hardware and attach it to the
Light/Lid Bar Bracket located on the center/backside of the Cleaner. Before tightening
the bolts, open the tank lid and secure it to the light/lid bar assembly fusible link. Do not
7