CLAS HU 0059 Manual - Page 15

Browse online or download pdf Manual for Service Equipment CLAS HU 0059. CLAS HU 0059 20 pages. 70l mixed waste oil drainer

Print Page
CLAS HU 0059 Manual
HU 0059
70l MIXED WASTE OIL DRAINER
INSTRUCTIONS
Oil extraction
1. Ensure that all the ball valves are in the OFF position.
2. Choose the suitable oil extraction probe for your car model and tightly connect it to the oil extraction pipe.
3. Insert the oil extraction probe into the engine oil inlet hole
4. Connect the air to the vacuum gauge.
5. Slowly turn on the "mini valve from oil extraction pipe" to begin oil extraction.
Notice:
• Place the machine in a at ground to avoid slides during operation.
• Hold the black hose protection sheath during oil extraction to avoid scald
• Oil temperature shall not exceed 60°C. It will cause serious damage to the components, in worse case, it could
lead to machine failure.
Oil collection from oil tray
1. Lift the vehicle to proper height.
2. Move the machine below the car engine, oil tray position right under
the vehicle oil drain hole.
3. Make sure "valve from oil extraction pipe" is turned OFF.
4. Turn on the "oil tray emptying valve" (Rotate in the counterclock
direction with the vertical direction to open).
5. And turn on "tank air inlet valve" to release internal tank pressure
6. Release oil drain bolt from car engine for oil collection from vehicle
to oil tank.