Aftershokz Bluez AS330 Manual

Browse online or download pdf Manual for Headphone Aftershokz Bluez AS330. Aftershokz Bluez AS330 4 pages. Bone conduction bluetooth headset

Print Page

AS330 AfterShokz Bluez Bone Conduction Bluetooth Headset

Keep ears open, be aware of surroundings.

Accessories:

Item

USB to micro USB Charging Cable

Tension Band (with instruction sheet)

Warranty Registration Card

Features:

Open Ear design to keep aware of surroundings.

Stereo Bluetooth headset with wireless phone and music functions

More comfortable and stable for extended use.

How to wear

Place the wraparound head band behind your neck with the transducers resting on the bone

in front of your ears, not on your ears.

Note:

The adjustable (and removeable) Tension Band on Bluez is recommended for those who

have a small head or feel Bluez is not secure on their head. Adjust to fit or remove the Ten-

sion Band as needed.

How to charge

Connect Bluez to a standard USB port on your PC or a wall charger via the USB charging ca-

ble. Bluez will fully charge in 3 hours. The LED Indicator will show solid red when charging,

and will turn solid blue when charging is completed.

Note:

It's recommended to charge Bluez before using for the first time.

Bluez is not functional while charging.

How to pair

Slide the Power Switch on Bluez to the "ON" position.(green)

Locate the Bluetooth menu on the device and select "AFTERSHOKZ".

- If Bluez is pairing with a device for the first time, it will enter the pairing mode automatically.

The LED indicator will flash blue/red.

- Bluez will automatically reconnect with a device that was previously paired in less than 18

seconds. The LED indicator will be flash blue.

- To pair with another phone or re-pair with a device, press the Play Button and hold for 5 sec -

onds to enter manual pairing. The LED indication will flash quickly blue/red.

Note:

If out of range while connected to a device (more than 33 feet/10 meters), Bluez will discon -

nect from the device. Once Bluez is back within range, it will automatically reconnect. How-

ever, if Bluez is disconnected for a long time(more than 3 minutes), you may need to press

any button on the headset, to reconnect the device.

If the device is turned off while connected to Bluez, Bluez will disconnect from it. When you

turn on the device again, just press any button on Bluez to reconnect manually.

LED indicator

Color

Red(quick flash)

Red(solid)

Blue(solid)

Quantity

Status

Low battery

Charging

Charging complete