Lenovo ThinkCentre M70z User Manual - Page 32

Browse online or download pdf User Manual for Desktop Lenovo ThinkCentre M70z. Lenovo ThinkCentre M70z 50 pages. Machine type: 7570, 7577, 7578, 7580, 7583, 7584, 7589, 7594, 7595, 7597, 7598
Also for Lenovo ThinkCentre M70z: (Spanish) Guías Del Usuario Manual (48 pages), (French) Manual D'utilisation (48 pages), (Korean) User Manual (48 pages), (Portuguese) Manual Do Utilizador (50 pages), (Portuguese) Guia Do Usuário (48 pages), (Dutch) Handboek Voor De Gebruiker (50 pages), (Polish) Podręcznik Użytkownika (50 pages), (Czech) Uživatelská Příručka (50 pages), (Turkish) Kullanıcı Rehberi Manual (50 pages), (Romanian) Ghidul Utilizatorului (48 pages), (Slovenian) Vodič Za Uporabnika Manual (50 pages), (Hungarian) Felhasználói Kézikönyv (50 pages), (Arabic) User Manual (48 pages), (Croatian) Vodič Za Korisnike (50 pages), (Croatian) Uputstvo Za Korisnike (50 pages), (Slovakian) Uživatelská Příručka (50 pages), User Manual (48 pages)

Print Page
Lenovo ThinkCentre M70z User Manual

Viewing or changing the startup device sequence

This section provides instructions on how to view or permanently change the configured startup device
sequence.
To view or permanently change the configured startup device sequence, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 21.
2. Select Startup ➙ Primary Boot Sequence. Read the information displayed on the right side of the
screen.
3. Select the first boot device, second boot device, and so on.
4. Press Esc to return to the Startup menu. Then, select the devices for the Automatic Boot Sequence
and Error Boot Sequence.
5. Press Esc to return to the Setup Utility program main menu. You might have to press Esc several times.
6. Press F10 to save the new settings and exit the Setup Utility program.
Notes:
a. If you do not want to save the new settings, select Exit ➙ Discard Changes and Exit.
b. If you want to return to the default settings, press F9 or select Exit ➙ Load Optimal Defaults.

Exiting the Setup Utility program

After you finish viewing or changing settings, press Esc to return to the Setup Utility program main menu.
You might have to press Esc several times. Then, you can do one of the following:
• If you want to save the new settings and exit the Setup Utility program, press F10 or select Exit ➙ Save
Changes and Exit. Otherwise, your changes will not be saved.
• If you do not want to save the new settings, select Exit ➙ Discard Changes and Exit.
• If you want to return to the default settings, press F9 or select Exit ➙ Load Optimal Defaults.
24
ThinkCentre User Guide