Lenovo ThinkCentre M91p Configuration Manual - Page 19

Browse online or download pdf Configuration Manual for Desktop Lenovo ThinkCentre M91p. Lenovo ThinkCentre M91p 38 pages. Intel active management technology configuration guide
Also for Lenovo ThinkCentre M91p: Specifications (5 pages), Deployment Manual (34 pages), Notice (6 pages)

Lenovo ThinkCentre M91p Configuration Manual
Intel(R) ME ON in Host Sleep States
Idle Timeout

Intel(R) AMT Configuration

The Intel(R) AMT Configuration menu enables you to configure an Intel AMT capable computer to support
the Intel AMT management features.
Select Intel(R) AMT Configuration from the Intel MEBx MAIN MENU window and press Enter. A message
will be displayed indicating that you can update network settings from the Intel(R) ME General Settings
menu. Press Enter and the INTEL(R) AMT CONFIGURATION window opens (Figure 4).
1.
M-off: An Intel ME FW power state when the Intel ME FW is shut down.
2.
M0: An Intel ME FW power state when the Intel AMT computer is turned on and operational.
3.
M3: An Intel ME FW power state when the Intel AMT computer is in sleep mode, hibernation mode, or turned off.
Option
.
Chapter 4
Intel AMT setup and configuration on Lenovo ThinkCentre M91p desktop computers
Description
Used to specify when the Intel ME will be turned on.
Select Intel(R) ME ON in Host Sleep States and press
Enter. You can choose which power package will be used.
• Desktop: ON in S0 – This option means only when
your computer is turned on and operational will the
Intel ME be turned on.
• Desktop: ON in S0, ME Wake in S3, S4-5 – This
option means the Intel ME will be turned on when your
computer is turned on and operational. The Intel ME
can be remotely woken up when your computer is in
sleep mode, hibernation mode, or turned off.
Notes:
– S0 : Power on state
– S3 : Standby sleep state
– S4 : Hibernate sleep state
– S5 : Shutdown sleep state
With Intel ME Wake on Lan (WOL), after the time-out timer
expires, the Intel ME remains in the M-off
command is sent to the Intel ME. After this command is
sent, the Intel ME will transition to the M0
and will respond to the next command. A ping to the
Intel ME can also make the Intel ME transition to an M0
or M3 state. Intel ME takes a short time to transition from
the M-off state to the M0 or M3 state. During this time,
the system will not respond to any Intel ME commands.
When the Intel ME is in the M0 or M3 state, the system
will respond to Intel ME commands.
Used to enable the Intel ME to wake up and define the
Intel ME idle timeout in the M3 state. The idle timeout
value indicates the amount of time that the Intel ME is
allowed to remain idle in the M3 state before transitioning
to the M-off state. The idle timeout value should be
entered in minutes.
Note: If the Intel ME is in the M0 state, it will not transition
to the M-off state.
1
state until a
2
or M3
3
state
11