Lenovo ThinkSERVER TS130 Configuration Manual - Page 4

Browse online or download pdf Configuration Manual for Desktop Lenovo ThinkSERVER TS130. Lenovo ThinkSERVER TS130 16 pages. Thinkserver ts130 getting started (serbian_latin)
Also for Lenovo ThinkSERVER TS130: Warranty And Support Information (36 pages), Warranty And Support Information (36 pages), System Installation Manual (14 pages), Important Notice (12 pages), Specifications (4 pages), (Portuguese) Warranty And Support Information (38 pages), (Portuguese) Warranty And Support Information (36 pages), (German) Warranty And Support Information (40 pages), (Swedish) Warranty And Support Information (36 pages), (Dutch) Warranty And Support Information (38 pages), (Finnish) Warranty And Support Information (38 pages), (Norwegian) Warranty And Support Information (36 pages), (Danish) Warranty And Support Information (36 pages), (Japanese) Warranty And Support Information (38 pages), (Greek) Manual (42 pages), (Polish) Warranty And Support Information (40 pages), (Turkish) Warranty And Support Information (38 pages), (Romanian) Warranty And Support Information (40 pages), (Slovenian) Warranty And Support Information (36 pages), (Hungarian) Warranty And Support Information (40 pages), (Arabic) Warranty And Support Information (34 pages), (Croatian) Warranty And Support Information (36 pages), (Slovakian) Warranty And Support Information (40 pages), Warranty And Support Information (34 pages), Warranty And Support Information (42 pages), Warranty And Support Information (30 pages), Warranty And Support Information (40 pages), Warranty And Support Information (36 pages), Getting Started Manual (18 pages)

Lenovo ThinkSERVER TS130 Configuration Manual
CONfIgURINg RAID 100 ON TS130
4. In the BIOS Setup Utility, go to the "Devices" tab and select "ATA Drive Setup."
figure 2 - RAID 1
5. Set "SATA Controller" to "Enabled" and "Configure SATA as" to "RAID."
If the SATA Controller is set to "Disabled" then internal SATA drive support will not
be enabled and the option to configure RAID will not be available.
"Hard Disk Pre-delay can be set to "Disabled" (the default).
To learn more go to www.lenovo.com/thinkserver
6. To accept the changes press f10 and select "Yes" when prompted to
"Save Configuration and Exit."

rAiD ConfigurAtion

Configure RAID using the pre-boot configuration utility.
1. If BIOS was just configured for RAID operation, the TS130 will soon restart itself.
Otherwise reboot the TS130.
If two HDD's are installed, and the SATA controller was configured for RAID mode,
the following prompt will be displayed.
At the prompt, again press CTRL-I to bring up the Intel Rapid Storage Technology
Configuration Utility.
4