Lenovo THINKSTATION D10 User Manual

Browse online or download pdf User Manual for Desktop Lenovo THINKSTATION D10. Lenovo THINKSTATION D10 4 pages. (taiwanese) recovery dvd user guide
Also for Lenovo THINKSTATION D10: Brochure & Specs (4 pages), Brochure & Specs (4 pages), Specifications (4 pages), (Spanish) Guía Del Usuario (4 pages), (French) Guide Utilisateur (4 pages), (Korean) Applications (4 pages), (Portuguese) Manual Do Utilizador (4 pages), (Italian) User Manual (4 pages), (German) Benutzerhandbuch (4 pages), (Swedish) User Manual (4 pages), (Dutch) User Manual (4 pages), (Finnish) User Manual (4 pages), (Norwegian) User Manual (4 pages), (Danish) User Manual (4 pages), (Japanese) Applications (4 pages), User Manual (4 pages)

Print Page

Using the recovery disc set

The recovery disc package for Windows Vista

™

restore your Lenovo

computer to the original factory configuration. The following table describes the

various types of recovery discs that are included in your recovery disc package.

Table 1. Contents of recovery disc package

Name

Description

Start Recovery Disc

This is a bootable disc that will start

the recovery process.

Operating System

This disc restores the Windows Vista

Recovery Disc

operating system.

Applications and

This disc restores the software that was

Drivers Recovery Disc

preinstalled on your computer.

Supplemental Recovery

This disc contains additional content,

Disc

such as updates to the software that

was preinstalled on your computer.

Note:

v You must have a DVD drive to use the recovery discs.

v Only the Start Recovery Disc is bootable.

If you do not have an internal DVD drive, you can use an external USB DVD drive. However, the

external USB DVD drive must be attached before you begin this procedure.

Important: During the recovery process, all data on all partitions of the hard disk will be deleted,

including any personal data and configuration settings. If possible, copy any important data or personal

files that you want to keep onto removable media or a network drive before you start the recovery

process.

Performing the recovery process

To recover your preinstalled software using the recovery disc set, perform the following steps:

Step 1. Make the DVD drive the first startup device in the startup sequence using the following

procedure:

a. Shut down the operating system and turn off your computer.

b. Press and hold down the F1 key, and then turn on the computer. When the logo screen is

displayed or if you hear repeating beeps, release the F1 key. The Setup Utility program

opens.

Note: If the Setup Utility program does not open, shut down the computer, wait

approximately 5 seconds, turn on the computer, then immediately press and release

the F1 key repeatedly until the Setup Utility program opens. The available options

might vary from those described below, depending on your computer model.

c. Depending on your model, do one of the following:

v Use the arrow keys to select Startup from the main menu. From the Startup menu, select

Startup Sequence and then press Enter.

consists of these user instructions and a set of DVDs to

Marked as

Quantity

One (1) disc.

One or more discs, depending on

computer model.

Varies by model. Not all computer

models require a Supplemental

Recovery Disc, so you might not have

this disc in your disc package. If your

computer model does require a

Supplemental Recovery Disc, you might

have one or more discs.