Lenovo 104614U User Manual - Page 17

Browse online or download pdf User Manual for Server Lenovo 104614U. Lenovo 104614U 32 pages. Remote management user guide

Print Page

Chapter 5. Remote console (KVM) operation

The remote console is the redirection screen, keyboard and mouse of the remote host system (the

ThinkServer Remote Management Module has been installed on it). If there is a need to use the remote

console of the managed host system, make sure that the server has Java* runtime environment plug-in.

When the remote console is started, a new window will be opened, showing the screen of the host system.

Operating the remote console is just like an administrator is sitting on front of the screen of the remote

system. This means that the user can use the keyboard and mouse as he usually does.

Note: Pay attention that if the host operation system is Windows 2003, set the display resolution under

1280*1024 (excluding).

The remote console is the redirection keyboard, video and mouse of the remote host system (the ThinkServer

Remote Management Module has been installed on it).

Step 1.

Click Console Redirection in this page to start the redirection window for remote console KVM.

Step 2.

By clicking Java Console, you can start the redirection console and carry out remote management

for server.

Step 3.

A pop-up window will be shown and begin to download Java network boot protocol Jviewer.jnlp

document after you click Java Console. And then, the Java applications for the implement of

remote console will be downloaded.

Notes:

• Before the JNLP document is booted, Java Runtime Environment (JRE) V6.0 Update 13 or

higher version must be set up on the client.

• The client browser must allow showing the pop-up windows from the IP address of ThinkServer

Remote Management Module.

This remote console window is a Java Applet for creating the TCP connections to the ThinkServer

Remote Management Module. The protocol over these connections is a unique KVM protocol,

rather than HTTP or HTTPS. This protocol dedicated port for KVM is #7578, port #5120 for CD-ROM

CD-ROM media redirection and port #5123 for floppy/USB media redirection. Your local network

environment must allow creating these connections. That is to say, if you have a private intranet,

the setups of firewall and Network Address Translation (NAT) must be configured accordingly.

When the remote console is started, the main window of remote console will appear.

The remote console shows the screen of the remote server. Operating the remote console is just like you are

in front of the remote server. The response speed maybe a little delay, depending on the bandwidth and

delay between the ThinkServer Remote Management Module and the remote console.

There is a menu bar on the top of the remote console window. You can view the status of the remote console

and configure the setup for locale remote console through the items on the menu bar.