Lenovo 104614U User Manual - Page 24

Browse online or download pdf User Manual for Server Lenovo 104614U. Lenovo 104614U 32 pages. Remote management user guide

Print Page

Make SMTP Setting

This page is used to set the source address for sending SMTP e-mail.

Step 1.

Enter the IP address for the SMTP mail server.

Step 2.

Click Save.

The User List page lists all users including configured users, with network permission. The options included

in this page are used to configure the IPMI users for servers and their permissions.

To add a new user, select a blank row from list and click Add User.

To modify a user, select this user from list and click Modify User to modify the relevant settings.

To delete a user, select this user from list and click Delete User.

Note: The user lenovo and three can not be modified or deleted.

In this page, you can select Direct monitoring on I2C bus to monitor BMC sensor mode directly from

I2C bus and get the BMC sensor address, or select External BMC monitoring to manually set the BMC

I2C bus address.

Note: It is recommended that users should not modify BMC sensor settings.

This page can be used to set the internal real-time clock of Remote Management Module. You can manually

adjust the clock or use the NTP clock server to set the internal clock of Remote Management Module in

accordance with the system clock. Once the Remote Management Module powers down, you need to reset

the clock. To avoid this problem, you can automatically set the internal clock to a NTP time server of

the current UTC time.

Note: The NTP server configuration will be blank if IP auto configuration is configured through either BOOTP

or DHCP in the Network settings, because the BOOTP or DHCP server does not provide the NTP server

information.

This SSL Upload page can be used to upload SSL certificate and private key in order to get access to

the device in safe mode.

Step 1.

Select the required SSL certificate and click the Upload button.

Step 2.

Then you will be prompted to confirm the certificate uploading. The system will give you notice

after the success of uploading the certificate. After the SSL certificate is successfully uploaded,

you will be prompted to reboot the system.

The Remote Control page allows you to execute the following remote operation on the server:

• Console Redirection

• Server Power Control

ThinkServer RD230 and RD240 Remote Management User Guide