Lenovo 7D7Q Quick Start Manual

Browse online or download pdf Quick Start Manual for Server Lenovo 7D7Q. Lenovo 7D7Q 2 pages.

Print Page

ThinkSystem SR250 V2

Type 7D7Q and 7D7R

Quick Start

Your shipping box contains the following items:

SR250 V2

⚫

Material box, including printed documentation

⚫

If any item is missing or damaged, contact your place of purchase.

Ensure that you retain your proof of purchase and packing material.

They might be required to receive warranty service.

First glance

Server front view:

•

Four 3.5-inch drives model

VGA connector (optional)

USB 2.0 connector

USB 3.2 Gen 1 connector

•

Ten 2.5-inch hot-swap drives model

USB 2.0 connector

USB 3.2 Gen 1 connector

Front operator panel

Four 3.5-inch drive bays

(0-3)

Rack release latches

VGA connector (optional)

Ten 2.5-inch hot-swap drive

bays (0-9)

Rack release latches

Server rear view:

•

Fixed power supply model

PCIe slot 1

PCIe slot 2

Power connector

USB 3.2 Gen 2 connectors

Ethernet connector 2

Note 1: For the rear view of the redundant power supply model, there

are two power connectors on your server.

Note 2: Depending on the configuration, the illustrations above might

differ slightly from your server.

Setting up the System

1. Install the required server components.

2. Install the server into the rack.

See the Rack Installation Guide provided with the rail kit.

3. Connect the cables.

4. Connect the management controller to the network.

5. Power on the server.

6. Configure the system.

For detailed information about installing hardware options and

configuring the system, see the following website:

http://thinksystem.lenovofiles.com/help/topic/sr250-

v2/introduction.html

Ethernet connector 1

(shared with XCC network

port)

Dedicated XClarity

Controller (XCC) network

connector

VGA connector

Serial connector