Lenovo 7D8K Quick Start
Browse online or download pdf Quick Start for Server Lenovo 7D8K. Lenovo 7D8K 2 pages.
Print Page
ThinkSystem ST50 V2
Type 7D8J and 7D8K
Quick Start
Your shipping box contains the following items:
ST50 V2
Material box, including printed documentation
If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase and packing material.
They might be required to receive warranty service.
Depending on the configuration, the illustrations in this document might
differ slightly from your server.
First glance
Server front view
Server front panel
Slim SATA optical disk
drive (optional)
Front panel
Front thermal sensor
Power button with
power status (White)
Drive activity LED
(White)
*
Mic-in connector
Combo audio jack
*
connector
USB Type-C 3.2 Gen2
connector
USB 3.1 Gen1
connectors (2)
USB 3.2 Gen 2
connectors (2)
*
Supported by Windows
Client OS only.
Server rear view
DisplayPort 1 connector
Audio line-out connector
Setting up the System
Install the required server components.
1.
Install the server into the rack if necessary.
2.
Connect the cables.
3.
Power on the server.
4.
Configure the system.
5.
For detailed information about installing server into the rack, installing
hardware options, and configuring the system, see the ThinkSystem
Documentation Center website:
https://thinksystem.lenovofiles.com/help/topic/st50-
v2/introduction.html
For the Rail Installation Guide that is provided on ThinkSystem
Documentation Center, see the following website:
https://thinksystem.lenovofiles.com/help/topic/rail_options/rail_options
_tower_servers.html
Padlock loop
PCIe slot 1
PCIe slot 2
PCIe slot 3
Kensington lock slot
Power cord connector
USB 3.2 Gen 1
connectors (2)
Two USB 3.2 Gen 1
connectors
Ethernet connector
DisplayPort 2
connector
Serial port connector
*
Supported by Windows
*
Client OS only.