3Com OfficeConnect 3CR100A97 Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Gateway 3Com OfficeConnect 3CR100A97. 3Com OfficeConnect 3CR100A97 17 pages. Adsl data

Print Page

WAN

Conﬁguration

Figure 7

Documents

RFC1483

Dynamic

Conﬁguration

After you successfully created your administrative account

and assigned a password, you can now start the WAN

conﬁguration.

The WAN Conﬁguration page is displayed (Fig 7).

: Before you begin, ensure that you have obtained all

Important

required WAN parameter information from your Service Provider

to properly conﬁgure the connection.

To conﬁgure a WAN protocol, select it from the WAN Protocol

ﬁeld's drop-down menu. The following WAN protocols are sup-

ported: RFC 1483 (ATM Adaptation Layer 5 Protocol), RFC

For a description of each ﬁeld on the WAN Conﬁguration page,

click the Help button.

After the WAN conﬁguration is complete and you are connected,

go to the Documentation link in the online help section, to get

more detailed information and step-by-step instructions in the

OfﬁceConnect Gateway User's Guide. Alternately you can type

www.3com.com/ocg/docs directly in your browser's address bar.

The only information required for an RFC 1483 conﬁguration in a

dynamic environment are the VPI/VCI numbers from your ISP.

The DHCP Client over WAN setting is enabled, and unless

instructed otherwise, the IP Routing Protocol should be set to

RIPv2.

Assign a meaningful name to your conﬁguration in the PVC Name

(Private Virtual Circuit) ﬁeld, and record your settings here:

PVC Name: ________________ VPI: _______ VCI: _______

Click the Apply button to apply your changes.

1483-MER (MAC Encapsulated

Routing), PPPoE (Point-to-Point

Protocol over Ethernet), PPPoA

(LLC-SNAP) (Point-to-Point

Protocol over ATM with Logical

Link Control), and PPPoA (VC-

Mux) (Point-to-Point Protocol

over ATM with Virtual Circuit).

When you select a WAN proto-

col, the WAN Conﬁguration page

interactively changes to display

the ﬁelds associated with the

selected protocol.