Lenovo 61FC-MAR6-WW User Manual - Page 35

Browse online or download pdf User Manual for Monitor Lenovo 61FC-MAR6-WW. Lenovo 61FC-MAR6-WW 45 pages.
Also for Lenovo 61FC-MAR6-WW: User Manual (46 pages)

Print Page

Manual image setup

Manually installing the monitor driver

3-5 T24v-20 Flat Panel Monitor User's Guide

If automatic image setup does not establish the image that you prefer, perform

manual image setup.

Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.

1. Press

at the bottom of the monitor to open the OSD menu.

2. Use

to select

3. Use

to select Image Setup and press

4. Use

to select Clock and Phase adjustment.

Clock (pixel frequency) adjusts the number of pixels scanned by one Horizontal



sweep. If the frequency is not correct, the screen shows vertical Stripes and the

picture does not have the correct width.

Phase adjusts the phase of the pixel clock signal. With a wrong phase



adjustment, the picture has horizontal disturbances in light picture.

5. When the image no longer looks distorted, save the Clock and Phase

adjustments.

6. Press

to leave the OSD menu.

Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft

Windows 10.

Installing the monitor driver in Windows 7

To install the device driver in Microsoft® Windows 7, do the following:

1. Turn off the computer and all attached devices.

2. Ensure that the monitor is connected correctly.

3. Turn on the monitor and then turn on the computer. Allow your computer to boot into

Windows 7 operating system.

4. From the Lenovo website https://pcsupport.lenovo.com/solutions/t24v_20, find the

corresponding monitor driver and download it to a PC to which this monitor is

connected (such as a desktop).

5. Open the Display Properties window by right-clicking Start, Control Panel, Hardware and

Sound icon, and then click the Display icon.

6. Click the Change the display settings tab.

7. Click the Advanced Settings icon.

8. Click the Monitor tab.

9. Click the Properties button.

10. Click the Driver tab.

11. Click Update Driver, then click Browse the computer to find the driver program.

12. Select Pick from the list of device driver program on the computer.

13. Click the Have Disk button. By clicking the Browse button, browse and point to the following

path:

X:\Monitor Drivers\Windows 7

(Where X indicates "the folder in which the downloaded driver is located" (such as a desktop)

and press

to access.